Belt IFH-1D provides close range FIR with temperature control
over the TARGETED AREA of body. It’s an ideal
and effective modern hi-tech system generally used at home,
beauty salons and weight losing centres.
It adopts first-class intelligent control technology to
effectively provide an even distribution of thermal heat
in a short period of time.
Easy and convenient to operate
Precision temperature and time controller operated by
Enhanced heating effect due to FIR emitted by high-tech
ACF (Activated Carbon Fibre technology) super conductive
Easy clean up, materials do not absorb heat, odours or
FIR Slimming Waist Belt
Hand Held Controller
Portable Infrared Sauna - Control
Mode Key :
Press MOde to choose to adjust temperature or time.
Display temperature. Press ''
to increase or press ''
to decrease the temperature, 1 grade for each time press.
The temperature has 9 grades ranging from 35 °C to 75 °C.
The default temperature is grade 5.
Display time. Press ''
to increase the time or press ''
to decrease the time, 5 minutes for each press. The time range
from 5 to 60 minutes. The default time is 30 minutes.
Press this button to start the device after
setting the time and temperature.
Heating Light : Shines green when
the device is heating and will be off when not working.
Keep away from sharp objects that may damage the unit .
Wrap the sauna belt (not too tightly)
around the chosen body part (abdomen, waist or hips. If
a massage or body oil is used, then it is recommended to
first wrap the body in a plastic film or sheet to protect
the sauna belt.
Check to see if your household voltage
is the same as that printed on the plug before plugging
the device into a power socket.
Insert the plug of the belt into a
power socket. Now the TEMP indicator (red) on the hand-handler
will light, and the digital display above will show default
temperature at grade 5. Press ' '
to increase the temperature or press ''
to decrease it, 1 temperature grade for each press.
The mode button one time and the TIME
indicator (yellow) will light. Meanwhile, the digital display
above will show the default time at 30 minutes. Press ''
to increase or press ''
to decrease the time, 5 minutes for each press.
Press START to start the device. Now
the HEATING indicator (green) will light and the device
will start working. It is suggested that you use the default
temperature (grade 5) and default time (30 minutes). You
can increase or decrease the time and temperature to suit
your personal needs and comfort. When the session is complete,
pull out the plug from the power socket and clean and store
At the end of the session towel off
the sweat and wait 15 or 20 minutes before showering or
having a bath, eating or drinking cold drinks. Do not worry
if your skin is reddish. This reaction is due to the constant
temperature it has been exposed to and will disappear within
a couple of hours.
glass of water (300-500 cc) before using the sauna belt.
Maintenance : Maintenance and Storage of the
Wipe the hand-held controller with a dry towel.
Wipe the surface of the sauna belt with a wet cloth after
use. A cotton cloth dipped in alcohol will keep the sauna
The device is designed for use as described in this manual
and no special maintenance is required.
Store device in a cool, dry and fire proof environment.
Do not store in a device near fire or in a hot place.
Pack and store only after heat has dissipated.
- 60°C / 95°F - 140°F
WxL = 21x125 (cm)
WEIGHT (GW / NW)
1 / 0.8 KG
PRECISE DIGITAL TEMPERATURE CONTROL
TECHNOLOGY FROM GERMANY
AUTO TEMPERATURE CONTROL